Number of views:
Round single-wave compensator
Number of views:
Product serial number
Return to the list
Customers need to establish the following standards when using metal hoses:
Metal hose: Also known as retractor, metal hose, the key is the safe operation of the pipeline. The key elastic element is a metal hose, and the radial, lateral and angular compensation of the pipeline is carried out by means of the telescopic and bending of the tube. Digest and absorb the vibration of mechanical equipment and reduce the damage of mechanical equipment vibration to the pipeline. Compensate for the radial, lateral and angular thermal deformation of the digestion and absorption pipeline. Digestion and absorption of large earthquakes and landslides on the deformation of pipelines.
Customers need to establish the following standards when using metal hoses
The metal hose is thermally deformed according to the shrinkage of the digestion and absorption pipeline, and the thermal deformation of the stretched digestion and absorption pipeline. According to the standard, it must be pre-stretched according to the working temperature before installation and use, and it must be pre-shrunk according to the working temperature before installation and use. However, at present, many manufacturers are afraid of making mistakes or inconvenient on-site service items. They have carried out pre-drawing or shrinking before shipment, or have vacated a relatively large capacity. There is no requirement for the construction party to actually operate on the spot. In fact, you can refer to the manufacturer's regulations.
Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table